The production is done in our own wood production premises, which, thanks to the area of 2.5 hectares, can ensure the permanent stock capacity. For all products the quality certified wood material is used, processed by standard modern technology on our own modern wood-cutting frame-saw line, and further, by drying in our own certified wood kiln (according to the ISPM Regulations).
Wooden packagings, wooden cases, wooden containers, etc.
Produced wooden cases, packagings, and containers may be combined with the board wooden material. In case of packing the generators, machines, semi-finished products or production lines of high weight (usually from 50 tons), the packaging is combined with steel reinforcement components (threaded rods, screwings, steel frames, …). In case of the delivery of final packing with steel frames, such a packaging is delivered with default tests and load tests. As a matter of course, we deliver a protocol of conformity in the Czech and English version, if the customer requires that. Packing may be completed by vacuuming into Al foil, or possibly into polythene cases including dessicated capsules.
Designed/production steps for a wooden packaging and wooden case:
1. On the basis of the delivered drawing documentation by the customer, with specification of all requirements and norms, possibly the destination of the final product (overseas case, overseas packaging).
2. Sending the drawing documentation of the product (including technical specification) which is to be packed, and consequently dispatched, either inland or overseas. In such a case, our company proposes a suitable wooden packaging, wooden case, wooden container, etc. The proposed packing is designed as our own drawing documentation, with a specified technology of packing and treatment.
3. The customer’s option is, as well, passing the technical specification of the packed product, and the packaging is designed by our designer, after a professional examination of the machine, equipment, or production line, which is to be dispatched.
Wooden support-stands may be produced according to the drawing documentation, delivered by the customer, or on the basis of the assigned technical parameters and the technical drawing of a product which is to be transported. Our service for the customer is a proposal of our own drawing documentation and of a proposal for packing the product, transported on a wooden support-stand, based on the final destination and delivery of the product.
The production of pallets may be carried out on the basis of the delivered drawing, or requirements assigned by the customer. In the latter case, a suitable type of a pallet is designed for each individual order.
Pallets may be produced in the combination with blocks from the pressed material, possibly from the hardwood. Pallets are, according to the customer’s wish, treated by the IPPC norm, or other requirements, depending on the final destination of products transported on pallets. Also, pallets with an extension may be produced.
Other marketed products and services:
Services we offer